PRODUCTS
Current Clamp for Electric Vehicles LAUNCH SMARTSAFE iSmartEV EC100
$300
Description
When the battery is low, the LO BAT indicator on the current clamp will be on. Please shut down and replace the battery in time. Use a cross screwdriver to open the battery cover when installing the battery. Pay attention to the polarity of the battery to avoid damaging the current clamp. Please use 9V dry battery for replacement. When the current clamp is not used for a long time, take out the battery.
|
DC Voltage/Current Testing
|
Supports current and voltage dual-mode display
|
√
|
|
Supports measurement range selection
|
√
|
|
|
Supports real-time test value digital display
|
√
|
|
|
Supports maximum, minimum, and peak-to-peak value display
|
√
|
|
|
Support measurement waveform storage and playback
|
√
|
|
|
AC Testing
|
Supports measurement range selection
|
√
|
|
Supports real-time test value digital display
|
√
|
|
|
Supports maximum, minimum, and peak-to-peak value display
|
√
|
|
|
Support measurement waveform storage and playback
|
√
|
Features
Specifications
Parameters
|
Test functions
|
DC test, DC voltage test, and AC test
|
Accuracy
|
±3%FS (23℃±5℃, below 75%rh)
|
|
Battery
|
9V dry battery
|
Phase error
|
≤3°(AC50Hz / 60Hz, 23℃±2℃)
|
|
Current test methods
|
Clamp CT, non-contact measurement
|
Zero-setting
|
Adjust the ZERO key for zero setting
|
|
Jaw dimension
|
φ16 mm×18 mm
|
Frequency response
|
DC~ 50kHz
|
|
Input measuring range
|
0~200A AC/DC
|
Working current
|
500mA
|
|
Resolution
|
1 mA AC/DC
|
Working temperature
|
0~50℃
|
|
Output gear
|
10mV/A (0~20 A), 100 mV/A(0~200 A)
|
Dimension
|
278×71×37 mm
|
